Friday, 31 July 2015 

Now available on the glazpart rectangular drain hole cover is the latest premium finish to add that final finishing touch to your linear foiled windows and profile.

Here, we show the drain hole covers finished on Irish Oak, Golden Oak and Mahogany foils. Most foils can be applied to match your window profile including solid colours.

If you need the embossed finish our process allows the wood grain emboss to be retained and enhance the finish of your products.

For solid colours you may also chose to have the cover moulded in one of the 27 colours all matched to your foil.

Contact our sales office to discuss your needs.

Friday, 24 July 2015 

Glazpart adds two new colours to it’s market leading range of through moulded colour matched drain hole covers. These have been developed to match the range of colour foiled window profiles which are becoming ever more popular in the UK window market .

The newly introduced colours are;

Dark Green (to match Renolit foil – Dark Green, nearest RAL 6009)

Dark Red (to match Renolit foil – Dark Red, nearest RAL 3011)

This is just the starting point for Glazpart as through moulded colours can be added quickly and easily and matched to any RAL of BS colour, upon request.

Tuesday, 21 July 2015 

Glazpart joins the Buzz at The Engineering Design Show 2015. The Engineering Design Show continues to prove ever more popular, last year attracting over 4,000 design engineer visitors to the Ricoh Arena, Coventry. The buzz around this year’s event is building and we are looking forward to welcoming even more visitors to the Glazpart Stand C110 on 21-22 October 2015.

The Show remains true to the founding principle of catering specifically for design engineers, offering best practice learning and practical design ideas for visitors through a focused exhibition, comprehensive conference and practical workshop sessions.

A high-level keynote conference will run alongside the exhibitions, delivered by prominent industry experts. Previous years have featured speakers from such illustrious companies as IBM, Cambridge Consultants, Infinity Red Bull Racing, Raspberry Pi, Rolls-Royce, Mercedes AMG Petronas and CERN to name just a few. This year’s conference programme will be announced soon.

In addition, a packed schedule of technical Workshops will attract many visitors keen to get hands-on, practical advice on technology and industry issues. After a successful introduction in 2014, the Embedded Design Show will focus on this growing sector of electronic engineering. Ultimately, three focused events will combine to offer design engineers a comprehensive experience focusing on their needs and their needs alone. To find out more about the Engineering Design Show 2015 and to book your place at this leading industry event, visit www.engineeringdesignshow.co.uk and join Glazpart at the show.

Wednesday, 14 January 2015 

Glazpart are proud to having completed 30 years of developing its business with its loyal customers since it was registered in February 1985. Glazpart was the evolution of the successful injection mould design and manufacturing business Hanley Precision tools, Ken Hanley made the decision to move into injection moulding.

Since 1985, the business has gone from strength to strength with custom products, glazing market solutions and the acquisition of Pro mould, whose strengths are in the joinery, steel fabrication and promotional products.

More recently the business has seen recognition in being shortlisted in the National Fenestration Awards 2014 and has been investing for the future with over £1,000,000 spent on capital and the launch of many new products.

Glazpart’s customer loyalty has been pivotal to its growth and is reflected in continued growth especially over the last 3 years. In a recent customer survey the feedback was very positive. They highlighted the professionalism, convenience and responsiveness of the team at Glazpart. Indeed, 79% of respondent’s stated they would recommend Glazpart to a friend or colleague.

Today, Glazpart is transformed from those early days and more products and services have been developed to support customers’ needs. Glazpart now offer a unique full service package and are a truly “one stop shop“. Over time we have enhanced our capability such as a class 10,000 clean room, twin shot moulding and the latest tool room machinery. This will be reflected in new literature due to be launched to commemorate achievement of this milestone

The team at Glazpart develop new projects from product and tooling design, to injection mould tool manufacture, injection moulding and surface finishing satisfying today’s ever more demanding customer needs. This is in addition to the development of our own product ranges to meet the needs of the fenestration and fabrication industries. For example we have the broadest range of injection moulded product for the window market, including trickle vents and glazing accessories supplied to profile houses, fabricators and installers alike.

Dean Bradley, Sales and Marketing Manager at Glazpart commented

“This milestone reflects a lot of commitment, hard work and investment from the team at Glazpart and we look forward to supporting our customers and developing leading edge solutions for the next 30 years“

Thursday, 11 September 2014 

After Glazpart successfully launched their new “Packers for Professionals” range during the FIT show 2014, specifically designed with trade counters and installers in mind, they can now be purchased directly from Window Ware. These brand new convenience packs are available in 28mm and come in handy packs of 100, or in mixed packs of 100s or 500s.

Product manager Richard Bryant said,

“the range was a welcome addition due to the number of customers who require smaller packs of glazing packers”

“Our ethos has always been to offer our customers a wide choice of products, and these convenience packs are perfect for some of our smaller customers, who don’t always need to purchase packers in multiples of 1000”.

“We started displaying them in our Trade Counter, and they have already proved incredibly popular, and have been welcomed by our customers.” he said.

For more information please visit www.windowware.co.uk

Thursday, 11 September 2014 

VBH has added the Glazpart Link-Vent to its selection of ventilators. Available in two sizes, 2500EQA and 5000EQA, the vent meets the requirements of Building Regulations Approved Document F1, and delivers similar performance to that of much larger vents, meaning more air throughput per mm. The design of Link-Vent’s internal opening flap allows the flap to be positioned to reduce draughts by directing air away from the occupants without reducing the air flow.

Link-Vent is available in Screw fix or Clip fix variants. Screw fix can be used on PVCu, aluminium and timber windows, with the rounded ends allowing it to be rebated into timber frames if required. VBH advise that Clip fix vents are a good option for PVCu and aluminium windows, speeding up the fitting process as no screws are required.

As well as the industry-standard white, brown, tan and black colours, Link-Vent can also be supplied in five printed or foiled wood grain finishes and a host of colours including Chartwell Green, Anthracite and Slate Grey and Cream. There is also the option to spray vents in any RAL colour to special order.

VBH Marketing Manager Gary Gleeson commented

‘With the increasing popularity of wood grain and coloured profiles this is a real benefit to the window manufacturer, specifier and installer, not to mention the home-owner, as it allows the vent to blend in fully with the frame material. We’re particularly excited about the colour options and are delighted to be working with Glazpart as a nationwide distributor of their new Link-Vent.’

More on Link-Vent can be downloaded from www.vbhgb.com or can be requested by calling VBH Sales on 01634 263300. – See more at: http://www.mytrade.tv/2014/07/03/vbh-adds-glazpart-link-vent-range/#sthash.rs5f9hq4.dpuf

Wednesday, 10 September 2014 

The scheme is based Network VEKA’s view that Network VEKA members should use the best hardware, ancillaries and services possible – and think they should enjoy special prices and other benefits in return. That is what Network VEKA’s Associate Supplier list is all about.

From hinges and fasteners to trickle vents and packers and even fleet vehicles, Associate Suppliers not only bring real benefits to members, they also give active support to Network VEKA centrally, adding to the power and activity of the organisation.

According to Dean Bradley – Sales and marketing Manager at Glazpart

“We share many of the values with Network VEKA and the drive for professionalism in the industry and supplying products to the highest standards. We look forward to contributing to the success of the network and its members”

Network VEKA is a prestigious organisation of highly skilled Installers of quality double glazed windows, upvc windows, conservatories and doors. The Network is made up of the very best replacement upvc windows installers and fabricators from every corner of the UK, Scotland, Ireland and Wales- window unit suppliers that have an ethical foundation which is built around customer care, quality upvc products and value for money.

The idea was, and still is, to raise standards across the upvc windows industry and ensure that customers are treated with the professionalism they deserve.

John Ogilvie, Managing Director of Network VEKA also commented

“I am delighted to welcome such a proactive and quality supplier as Glazpart to be a Network VEKA affiliate and look forward to working with them and our members in the months ahead”

Network VEKA’s sterling reputation is built on the strength of hundreds of thousands of satisfied customers who have invested in Network VEKA top end upvc conservatories, double glazed windows or doors and actively give network veka reviews and recommend our double glazing companies to friends and family.

Tuesday, 25 March 2014 

Banbury-based Glazpart, is a specialist injection moulding company with extensive experience in the fenestration industry, employing 80 staff at its ISO 9001:2008 certified site, producing millions of mouldings each month.

Glazpart has launched a new catalogue covering its extensive range of trickle vents for the provision of back ground ventilation in buildings and to meet the requirements for approved document F1.

Easily down loadable online at https://glazpart.com/products/trickle-ventilation/ or read online as a “flip file” as though reading a paper copy all with instant access, the catalogue provides detailed summaries of all of its key products features and benefits.

We attempt to answer key questions such as –

Why do we have to fit trickle vents?

What do trickle vents do?

What is EQA? As the traditional 2,000 mm2 and 4000 mm2 no longer applies under the prevailing building regulations. Guidance is offered on the complex building regulations which vary across the UK and how to meet them.

New to the catalogue is detail of the extensive range of over 3,500 colour options, whether a moulded colour, vacuum foiled, printed wood grain or paint sprayed tricklevent. Also, covered are our extensive packaging options such as colour combinations E.g. White internal vents with a colour matched external canopy.

New applications are also detailed including combustion air provision, sash window options and products to provide ventilation in Bi fold or patio door systems.

According to Dean Bradley – Sales and Marketing Manager

“This is a key document for Glazpart and our customers as we try to improve market knowledge and understanding of ventilation requirements. This document supports our customers to access the right technical data easily whilst providing useful background information to improve regulatory understanding and compliance whilst raising standards across one of our key markets.“

Whilst downloading the catalogue there is the option to keep in touch through social media or you can add your details to our electronic mailing list to find out the latest developments in trickle ventilation at Glazpart as they happen.